FAQ's
Do you have questions? We are happy to answer them. We have already answered the most frequently asked questions for you below.
Through one of our recommended installers. Please contact us for further information.
Yes. Please contact us so we can put forward an appropriate contractor.
When dry, all of our systems have a good degree of slip resistance. When spillages occur or if there are areas that are continuously wet and require a higher degree of slip resistance, we can adjust the texture of the seal coats.
It can, but depends hugely on what is existing and how sound / well bonded it is.
The processing times of the Arturo products differ from product to product. For most Arturo products, there is a processing time of at least 20 minutes. There are products (1 component or water-based) that have a longer processing time. For the processing time per product, please refer to the product documentation.
With two-component products, a minimum mixing time of 2 minutes should be respected. Is there a 3rd component added than it should be mixed at least 1 minute additionally. A good mixture provides a consistent product and gives the best results.
In general, after applying the last layer, the floor can be charged mechanically after 3 x 24 hours and after 7 x 24 hours chemically and with water.
No, a primer is not always necessary. For the adhesion, a primer is not necessary. Under mortar, mastic and pebble floors Unipro recommends a primer. Under coating floors advises Unipro in special situations to use a primer.
No, not all substrates must be blasted. Unipro recommends dense, non-absorbent substrates to be sanded or blasted. Also soiled substrates should be (flame)blasted, with the ultimate objective, to obtain good adhesion to the subfloor.
This is different for each system. There are systems that are applied in two days (coating), but the application of a system can also take 4 to 5 days (e.g. mortar floors with a seal layer).
The main differences are the thickness and application method. Self-smoothing floors have a minimum thickness of 1 mm and the material can be poured. Coating Floors are floors with a maximum thickness of 0.5 mm. These floors are applied with of a roller.
For arturo epoxy based products almost all RAL colours are available. Some of the colours require a longer production time. Some colours, mainly yellow, orange and red are not opaque in 2 coats. Unipro recommends to apply under these colors a first layer in the color 7035.
arturo polyurethane-based products are available in many colours. For the entire available range, download the responding arturo Colour Overview or have a look at our Arturo Color Collection.
For the majority of requests, yes, except for metallic or pearlescent colours.
es. Please contact us for further information.
The Arturo products are generally only for indoor applications, but we also offer product solutions for outdoor use. Our floor specialists will be pleased to advise on technical possibilities, product characteristics and the most suitable flooring system.
We have an experienced team that can assess your project and help tailor a specification to meet your needs and requirements.
We only supply our products to experienced installers. Please contact us for further information.
This will depend on the chosen flooring system. An experienced installer will be able to provide you with a quotation.
Yes. Please contact us for a list of reference sites.
Localised repairs are easily carried out, although will be visible, especially upon initial completion. This is a very quick process and, unlike a vinyl or tile finish, will remain completely seamless and impermeable to liquids.
Resin floors are extremely versatile and almost certainly one of our systems will meet your flooring needs.
Resin floors are seamless and impermeable, meaning they’re hygienic and easy to clean; available in a range of colours with virtually limitless design possibilities; offer safe environments thanks to its slip resistance; easy to repair and provide outstanding durability; exceptional chemical and mechanical resistance make it the flooring of choice for most industries; highly resistant to UV light, a range of temperatures and resistance to cracking in certain finishes.
There is no type of flooring that will be resistant to staining from spillages of all existing chemicals. In summary, resin flooring offers exceptional resistance to staining from common agents, such as coffee, tea, wine and sugary drinks. For more information, please speak to a team member or refer to the chemical resistance lists on the website.
Yes.
We are part of the UZIN UTZ group with over 100 years experience in flooring. The group incorporates a whole wealth of flooring skills with brands such as Uzin, Arturo, Wolff, Pallmann and Codex. Our company encompasses anything and everything to do with the installation, renovations and maintenance of all types of floor coverings. Our Arturo products are manufactured in the greenest production facility in the Netherlands.
Is your question not listed? Then please contact us, we will gladly answer your questions.
